Skip to main content

DMC-1411

PC/104 1-Axis Motion Controller

For new applications, Galil recommends the new generation DMC-3x01x series single-axis controllers. The DMC-1411 is an economical 1-axis motion controller for the PC/104 Bus. The DMC-1411 features an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo motor control. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and ecam. Like all Galil controllers, DMC-1411 programming is simplified with two-letter, intuitive commands and software tools for servo tuning and analysis.

Features
  • For new applications, Galil recommends the new generation DMC-3x01x series single-axis controllers.
  • PC/104 bus format
  • Accepts up to 8 MHz encoder frequencies for servos and 2 MHz for steppers
  • PID compensation with velocity and acceleration feedforward and integration limits
  • Modes of motion include jogging, point-to-point positioning, contouring, electronic gearing and ECAM
  • Multitasking for concurrent execution of two application programs
  • Memory for application programs, variables and arrays
  • Accepts inputs from two encoders for gearing or dual-loop applications
  • 7 Uncommitted digital inputs, 3 digital outputs
  • High Speed position capture
  • Forward and reverse limits and home input
  • 40-pin IDC connector
  • Custom hardware and firmware options available
Part Number Description 1 pc 100 pc
Interconnect module $155 $100
ICM with optoisolation $205 $150
PC/104 1-axis $595 $395

Note: Pricing shown is for domestic purchases only.

Image Part Number Description
40-pin cable for DMC-1411