gclib  2.0.8
Communications API for Galil controllers and PLCs

◆ GInterrupt()

byte GInterrupt ( )

Provides access to PCI and UDP interrupts from the controller.

Returns
The status byte from the controller. Zero will be returned if a status byte is not read.

Wrapper around gclib GInterrupt(), http://www.galil.com/sw/pub/all/doc/gclib/html/gclib_8h.html#a5bcf802404a96343e7593d247b67f132 -s ALL or -s EI must be specified in the address argument of GOpen() to receive interrupts.