If it is necessary to replace an obsolete controller in your system, please contact Galil for recommendations. Galil strives to keep our products backwards compatible to make upgrading as painless as possible. New controllers are often more compact and cost-effective.
This table was last updated in July of 2022 and will be updated as is necessary.
|
Controllers
|
|
- IOC-7007
- DMC-6xx series
- DMC-100
- DMC-105
- DMC-120
- DMC-150
- DMC-2x0 series
- DMC-200/201/205
- DMC-300 series
- DMC-4x0 series
- DMC-500 series
- DMC-6x0 series
- DMC-7x0 series
- DMC-10x0 series
- DMC-12x0 series
- DMC-13x0 series
- DMC-13x8 series
- DMC-1410 series
- DMC-1412
- DMC-1414 series
- DMC-1416 series
- DMC-1550-1580
- DMC-16x0 series
- DMC-17x0 series
- DMC-17x8 series
- DMC-18x0 series
- DMC-20x0 series
- DMC-21x0 series
- DMC-2112 to DMC-2142
- DMC-2200 series (4200 is replacement)
- GL-1200
- MCC-3000
- PIC-850
- SSV-800
- RIO-47122
- RIO-47102
- DMC-1417
|
- AB-79x00 series
- AMP-1140
- AMP-1460
- AMP-1900
- AMP-19520
- AMP-19540
- AMP-20420
- AMP-20542
- AMP-70
- CB-36-25
- CPS-4-72
- CPS-6-48
- CPS-12-24
- CPS-12-56
- CPS-15-40
- CPS-15-72
- DB-10096 (-96 with DMC-10x0)
- DB-23010
- DB-63010
- DB-14064
- DMM-900
- EBB-905
- HPGL Software
- ICB-930
- ICB-960
- ICB-933
- ICM-1460-20W
- ICM-2908
- IOM-1964
- MOTOR-50-1000
- MBA-60-60
- MSA-12-80
- N34 Motor
- PB-23020
- PCMATE
- PCM-20900
- TERM-H
- TERM-P
- TERM-Panel-BL
- N23-53-1000 Brush Motor
- ICM-20500
- ICM-20501
|
