DMC-40x0 Part Number Generator

Home
Motion Controllers
- - Ethernet
  - DMC-40x0
  - DMC-41x3
  - DMC-42x0
  - DMC-21x5
- - PCI
  - DMC-18x6
  - DMC-18x2
- - Single-axis
  - DMC-3x01x
- - Accessories
  - Software
  - Motors
  - Power Supplies
  - Cables
PLCs
- - EtherCAT
  - RIO-574x0
- - Other
  - Product Comparison
  - Customizations
  - Prior Generation
EtherCAT
- - Master
  - DMC-500x0
  - DMC-52xx0
- - Smart Drive
  - EDD-3701x
- - Remote I/O
  - RIO-574x0
Downloads
Learn
Order
News
About
Sign In

DMC-40x0 Part Number Generator

Breadcrumb

Home
How to Order
Part Number Generators
/
DMC-40x0 Part Number Generator

Reset Part Number

Choose Number of Axes

Communication Board

Interconnect for Axes 1-4

Interconnect for Axes 5-8

Amplifier for Axes 1-4

Amplifier for Axes 5-8

Shunt Regulator

Controller Board Options

4-20mAAll analog inputs converted to 4-20mA analog inputs PCS More InfoInclude Power Cable Set DINDIN Rail Mounting Option 12V12VDC controller power (appropriate only if no Galil amplifiers are used) 16BIT16bit ADC. 12bit is standard. TRES4Adds 120 Ohm Termination Resistor to Main and Aux Encoder Inputs. Single Ended Encoders will not work with this option. TRES8Adds 120 Ohm Termination Resistor to Main and Aux Encoder Inputs. Single Ended Encoders will not work with this option. MOInstall MO jumper to have Motor OFF as default on Startup ISCNTLIsolation of controller power from amplifier INVELOInverted ELO (Electronic Lock-Out) Logic CER More InfoFirmware changes for ultrasonic ceramic motors

Communication Board Options

5V5V logic for the extended I/O. 3.3V is standard P1422RS-422 on Main (P1) P2422RS-422 on Aux (P2) P422RS-422 on Both

Axis 1-4 Amp Options

160V160V DC Max Amplifier Input Voltage 2PBAll Channels 2 Phase Brushless Servo / Closed Loop Stepper 100mA100mA output capacity for AMP-43140 SSRSolid State Relay option (see Appnote #2513 for details) HALLFFiltered Hall Sensors on Amp

Axis 5-8 Amp Options

Axis 1-4 ICM Options

BiSSBiSS Encoders. Quadrature Encoders are standard SSISSI Encoders. Quadrature Encoders are standard DIFFDifferential analog motor command outputs. Single-ended is standard STEPDifferential Step/Direction outputs. Single-ended is standard

Axis 5-8 ICM Options

Axis 1-4 Amplifier Enable

Axis 5-8 Amplifier Enable

5V, 12V, and 24V Amp Enable option is field configurable with a jumper. Default setting is 5V, HAEN, Sinking.

Product Description

1-axis Ethernet/RS232
Single Ethernet Communications Board
Axis connector with D-type connectors

DMC-4010-C012-I000

(1780 + 0 + 0)

Unit Price (USD) $1780

Although we work to ensure all pricing online is as accurate as possible, prices must be confirmed by Galil upon order entry.

Since our introduction of the first microprocessor-based motion controller in 1983, Galil has remained a leading innovator. By offering our customers powerful, cost-effective and simple-to-use motion controllers and PLCs backed by superior application support, our commitment is to be the primary source for any motion control and I/O application.

Home
EtherCAT
Order

Motion Controllers
Downloads
News

PLCs
Learn
About

Address: 270 Technology Way, Rocklin, CA 95765

Toll-Free: (800) 377-6329 (US Only)

Phone: (916) 626-0101

Fax: (916) 626-0102

Email: support@galil.com

Contact Us

Please sign in or register an account before submitting your message.