Application Notes

Galil's application note library provides useful technical information about various topics including Galil motion controllers and RIO PLCs, DMC programming, software, motors, drives, encoders HMI's and other hardware.

Application Note numbers have special meaning. See the legend below for more information.

Note ABCD
A: 1 = Hardware
 2 = Application Programming
 3 = Firmware
 4 = Software
 5 = Miscellaneous
B: 1 = Unused
 2 = Econo
 3 = Legacy
 4 = Optima
 5 = Accelera
CD: xx = number of the note

Featured Application Notes

Application Note Category
Note 1435: Protecting Encoder Input Circuitry Galil Hardware, Electrical Considerations
Note 1427: Opto-Isolation Option for ICM-1900/ICM-2900 Galil Hardware, Electrical Considerations
Note 1420: Using Non-General I/O for General Use Inputs Galil Hardware, Electrical Considerations
Note 1419: Connecting Loads To Digital Outputs Galil Hardware, Electrical Considerations
Note 1417: Encoder Failure Circuitry Galil Hardware, Electrical Considerations
Note 1220: Disabling Hardware Handshaking Galil Hardware, Electrical Considerations
Note 1450: DMC-18x0 - New Style Mechanical Specifications Galil Hardware, Mechanical Dimensions
Note 1445: DMC-18x0 - Old Style Mechanical Specifications Galil Hardware, Mechanical Dimensions
Note 1443: ICM/AMP-1900 Mounting Dimensions Galil Hardware, Mechanical Dimensions
Note 1442: DMC-2xx0 Mounting Dimensions Galil Hardware, Mechanical Dimensions
Note 1441: ICM-2900 Mounting Dimensions Galil Hardware, Mechanical Dimensions
Note 1440: ICM-2900-FL (Flange) Mounting Dimensions Galil Hardware, Mechanical Dimensions
Note 1231: DMC-21x3 Interconnect Module Dimensions Galil Hardware, Mechanical Dimensions
Note 1230: DMC-21x2 Board Dimensions Galil Hardware, Mechanical Dimensions
Note 1229: DMC-21x3 Board Dimensions Galil Hardware, Mechanical Dimensions
Note 1228: DMC-1415/1425/3415/3425 Board Dimensions Galil Hardware, Mechanical Dimensions
Note 1225: DMC-1425-BOX Mounting Dimensions Galil Hardware, Mechanical Dimensions
Note 5467: Distributed Ethernet Control Options Galil Hardware, Communication Methods
Note 5451: Converting from PCI to Ethernet Controllers Galil Hardware, Communication Methods
Note 5449: Suitability of Ethernet for Motion Control Galil Hardware, Communication Methods

Since our introduction of the first microprocessor-based motion controller in 1983, Galil has remained a leading innovator. By offering our customers powerful, cost-effective and simple-to-use motion controllers and PLCs backed by superior application support, our commitment is to be the primary source for any motion control and I/O application.

Address:  270 Technology Way, Rocklin, CA 95765

Toll-Free:  (800) 377-6329 (US Only)

Phone:  (916) 626-0101

Fax:  (916) 626-0102

Email:  support@galil.com

2020 © Galil All Rights Reserved.