In addition to ServoTrends (Galil's quarterly news letter), Galil also provides What's New At Galil. This informational letter will keep you up to date on everything Galil on a monthly basis! It will contain information about our new and exciting products, enhancements to existing products, training announcements, and technical motion control articles. If you are already registered for the ServoTrends news letter you will be receiving the What's New At Galil news letter as well. If not register now to receive your free copy via email!
Galil 2-day Live Training Coming in November 2016
Our next two-day product school is Thursday November 3, 2016 through Friday November 4, 2016. The training will be at our headquarters in Rocklin, CA (near Sacramento).
The Yaskawa Sigma-7 and Estun ProNET EtherCAT Drives Now Supported
Yaskawa's Sigma 7 (left) and Estun's ProNET (right)
Galil’s EtherCAT Masters (DMC-52xx0 and DMC-500x0) now provide support for Yaskawa’s Sigma-7 and Estun’s ProNET EtherCAT drives. The Sigma-7 drives include a power range from 50W-15kW and the ProNet Series includes a power range from 50W-22kW. The addition of these two drives, along with Galil’s eleven other EtherCAT supported devices from various manufactures, will provide greater flexibility and convenience for Galil EtherCAT customers.
[White Paper] Advanced Applications of Electronic Gearing Part 1
Part 1 of 3: Tension Control on Spindle Wheel
Introduction
Electronic gearing in motion control allows for a slave axis to follow a master axis with a programatically set gear ratio. There are certain applications that obviously lend to an electronic gearing solution, but there are some challenging applications where the functionality of electronic gearing can greatly simplify a solution in a manner that may not seem obvious at first. This series of three papers will discuss how electronic gearing can provide simple solutions to different motion control challenges. The second and third installments will provide solutions to the problems of making precision adjustments for a cutting axis on a high-speed material feed, and image drawing or writing on a moving conveyor system.
The New DMC-52xx0 EtherCAT Master, 32 Axis Now Available
Introducing the DMC-52xx0 EtherCAT master, Galil’s first 32 axis motion controller. This new addition to Galil’s EtherCAT family is a pure EtherCAT controller with the ability to control up to 32 drives and 2 I/O modules. This space efficient package also provides uncommitted I/O for easy integration into any EtherCAT application.
The DMC-52xx0 is offered in 2, 4, 8, 16, and 32 axis formats. Coordinated moves can be done within banks of up to 8 axes allowing for minimal changes of Galil’s programming language. The DMC-52xx0 operates in Cyclic Synchronous Position mode (CSP). In this mode, the servo control loop is closed on the EtherCAT drive while the Galil controller sends motion profile commands at a rate of 1 kHz. Galil supports a host of EtherCAT devices for virtually any application. See the list below for more details.